Xiaomi – Mi 10000mAh Power Bank 2S – Black

KSh 1,999

  • ATL and Lishen Li-polymer batteries employed for a safe, efficient, and compatible user experience
  • 10000mAh Mi Power Bank 2’s actual output capacity is enhanced by 10% more than the first generation.
  • Takes 1 hour and 55 minutes to fully charge a Mi Note, 20% quicker than the first generation. With the 5.0V2.0A, 9V/12V18W input, the recharging time is greatly reduced
  • Aluminum alloy casing with anodic oxidation treatment + curved sides for ease of handling
  • Only 14.1 mm in depth, 10000mAh Mi Power Bank 2 is 1/3 thinner than the first generation, easily slips into your pocket for take-anywhere experience.
Clear
SKU: N/A Category:
 

Description

From the Manufacturer

Your travel companion

The 10,000 mAh Mi Power Bank 2S is small and portable, provides dual USB port output, and compatible with multiple fast charging protocols. Like a travel companion, it accompanies you throughout unforgettable life journeys.

Dual USB port output
10,000 mAh Mi Power Bank 2S

One output port is not enough, two are better

10,000 mAh Mi Power Bank 2S uses two USB port outputs. The product has an accurate control circuit that ensures the two ports have the right power to charge two smart devices at the same time.

Higher charge/discharge efficiency
Up to 18 W high power input

10000 mAh Mi Power Bank 2S can also achieve 18W power input through 12V1.5A and 9V2.0A, greatly reducing its charging time.

Compatible with multiple fast charging protocols
Charges the mobile phone more rapidly

For single port output, the 10,000 mAh Mi Power Bank 2S for fast device charging compatible with multiple fast charging protocols, with power up to 14.4 W. In case of simultaneous output of the dual ports, each port can achieve the output capacity of 5V 2.4A with the total power of up to 15 W. The smart mobile power supply for fast charging clearly knows the value of time

The large 10,000 mAh capacity satisfies daily use needs

The actual output capacity is 6,500 mAh, and the plate-end conversion rate exceeds 90%. The 10,000 mAh Mi Power Bank 2S can charge the device multiple times. The actual output capacity is 6,500 mAh. It ensures long and reliable battery life for electronic devices such as mobile phone, tablet PC, and digital camera.

Process upgrade
Held with one hand for maximum comfort

Aluminum alloy shell with anodic oxidation process + 180° arc edge

The molded metal shell surface undergoes an anodic oxidation process treatment and features higher structural strength, drop resistance, collision resistance, sweat resistance and anti-corrosion. The refined surface sandblasting treatment complies with the arc design of ergonomics, making it easy for the user to hold the product with one hand.

The high-quality circuit chip and multiple protection improves safety

The product adopts a high-precision resistance capacitance sensing device. Its advanced circuit chip ensures safety, optimizes the conversion rate and stabilizes voltage discharge. Meanwhile, multiple circuit protection is implemented to easily cope with various exceptions such as over-charge, over-discharge, high temperature and short circuit in the discharge or standby status, providing a safe power supply to the user and enhancing the charge and discharge efficiency in a holistic way.

  • Temperature protection

    The thermostat and temperature control mechanism ensure that the lithium battery operates in a safe temperature range.

  • Short circuit protection

    Automatic protection is implemented in case of short circuit, avoiding damage to the main board and battery.

  • Reset protection

    Reset circuit processing is included. If the product cannot operate properly, normal operations can be restored by pressing the Power Check button.

  • Input overvoltage protection

    Excessive input voltage is prevented through processing the OVP circuit, avoiding damage to the backend circuit.

  • Input anti-inversion protection

    When the Micro USB port of the USB cable is inserted inversely, the circuit will automatically interrupt operations and protect the charged device.

  • Output overcurrent protection

    The output current is checked intelligently at the right time. When the output current exceeds the upper limit, the output is closed actively to protect the device to be charged.

  • Output overvoltage protection

    The output voltage is checked intelligently at the right time. When the output voltage exceeds the upper limit, the output is closed actively to protect the device to be charged.

  • Over-charge and over-discharge protection of battery

    Special Japanese lithium battery protection devices prevent battery damage by eliminating over-charge or over-discharge.

  • Hardware level battery overcurrent short circuit protection

    Battery overcurrent and short circuit conditions are detected by hardware, and the system responds fast to block the battery circuit and ensure battery safety effectively.

The lithium polymer cell meets the power supply requirements of multiple devices

Adopts a high-quality lithium polymer cell

The 10,000 mAh Mi Power Bank 2S uses a high-quality lithium polymer cell, ensuring long and reliable battery life for devices such as mobile phones, tablet PCs and digital cameras, and is compatible with mainstream mobile phones and tablet PCs.

Adjustable, supports small current charging

Double press the key to start the 2-hour small current mode

After you double press the key to start the 2-hour small current charging mode, the Bluetooth headset and Mi Band can be charged. You don’t need to worry about charging a small current device any more.

  • Mi Bluetooth headset
  • Mi Band

• 1 Year Limited Warranty*
* Warranty becomes null and void from electrical & power surges or power related issues.

Additional information

Colour

Black, Blue, Blue Silver, Gold, Silver, Silver, Black